|
|
|
 |
Revolution more than just a name |
|
|
|
|
Revolution RAMMER Xtenda RM
|
|
The Xtenda RM is a rear mount design that features the fully hydraulic mast which com pacts up and is extended via a lever on the valve bank. The base is solidly constructed with a superior build to traditional designs, allowing the sizable main hinge to be set low on the base.
Ease of usage with the Xtenda mast is light years beyond and technologically superior to the traditional hinge beam mast . The Xtenda design is simple to use, low maintenance and has low wear and tear. The Xtenda mast also enhances balance when travelling.
The Xtenda mast can be used at any height to drive posts and the Xtenda mast will pull out posts & strainers as a standard feature
|
|
3.5 m vertical compacted height
- 4.5 m average working height
- 4.8 m working height with legs dropped down
- 25 degrees side to side mast angle
- 10 degrees forward/ 20 degrees back in/out angle
- Mast section for Auger kit.
- 250 kg Hammer
- Contractors post cap.
- UHMWPE replaceable anti wear pads.
- High quality paints used to assist corrosion prevention.
Postdriver weight from est 720 kgs
Tractor 70 hp plus
|
|
|
Options
|
“Shifta” 400 mm side to side movement
Automated auger kit |
|
|
|
|
  
 |
|
|
|
|
