|
|
|
 |
Revolution - RAMMER Range |
|
|
|
|
Revolution RAMMER RM
|
|
The rear mount design is widely recognised as the most cost effective configuration on the market. But at Revolution we realise that our starting point had to be strong enough to justify it’ s existence. Strong but simple, with some Revolution features thrown in forgood measure.
Click here for full details - Or use the left hand links section |
|
|
|
|
|
|
|
|
Revolution RAMMER Xtenda RM
|
|
The Xtenda RM is a rear mount design that features the fully hydraulic mast which com pacts up and is extended via a lever on the valve bank. The base is solidly constructed with a superior build to traditional designs, allowing the sizable main hinge to be set low on the base.
Ease of usage with the Xtenda mast is light years beyond and technologically superior to the traditional hinge beam mast . The Xtenda design is simple to use, low maintenance and has low wear and tear. The Xtenda mast also enhances balance when travelling.
The Xtenda mast can be used at any height to drive posts and the Xtenda mast will pull out posts & strainers as a standard feature.
Click here for full details - Or use the left hand links section |
|
|
|
|
|
|
|
|
Revolution RAMMER Converter
|
|
|
The Converter has 1 metre of side shift.
The CONVERTER will take all three of Revolutions Rear mount designs
The RAMMER RM
The RAMMER Xtenda RM
The Telescopic RM
The RAMMER CONVERTER is from the RAMMER Range and is a independent side mount base attachment that can be used out either the left or right hand side of the Tractor by a simple manual conversion.
Click here for full details - Or use the left hand links section |
|
|
 |
|
