|
Postdriver Links
|
|
|
 |
|
|
 |
Revolution Telescopic 180 |
|
|
|
|
|
|
|
| The applications of the Revolution Telescopic 180 are truly groundbreaking. Main features include a 180 radius subframe with 600 mm sideshift, fully hydraulic Telescopic mast, UHMWPE replaceable anti wear pads, making the need for greasing obsolete. This model offers you unparralled movement. Save on manual input, save on time spent getting into awkward spots. |
|
- Fully hydraulic (see image 1 right)
- 180 degree radius subframe with 600 mm sideshift
- Radius subframe can be lifted upwards or downwards to reach up and down banks or across drains (See image 2 right)
- Fully hydraulic Telescopic Mast
- Telescopic Mast can be used at any point around the 180 degree subframe
- Telescopic mast can be used while at any height to drive posts.
- Telescopic mast Extended height 5.4 m; Compacted vertical height 3.3; compacted angled over height for transport 2.7 m (See images 3&4 right)
- Telescopic mast drives up to a 4.2 m pole.
- Telescopic mast drives posts into ground level.
- Telescopic mast pulls out posts and strainers. This is a standard feature. (See image 5 right)
- Telescopic mast can be used to lift green strainers & poles
- No grease nipples, no greasing required
- Replaceable UMHWPE anti wear pads, no steel wearing on steel (except mast face were weight slides up and down)
- Excellent on retaining walls and stock yards. Can drive up to 6 posts without having to move the tractor.
- 3.1 m reach out back of tractor (See image 6 right)
- One operator only, no need for tractor operator. Only need to get off tractor once to drive posts.
- Developed for hill country work. very adapt on hill work and safer to use than a traditional sidemount design. Can use Telescopic mast out back or swing around to post when in position, when not in position use mast as counterweight. Telescopic mast can also be used compacted to keep weight low. (See image 7 right)
- Exceptionally well balanced, carry bulk of weight behind tractor wheel as with any conventional sidemount, with added advantage of being able to transfer weight around to other side.
- Bulk of weight can be transferred to top side when transversing slopes enabling bulk of weight to be used as a counterweight to create balance.
- Easily transported (See image 8 right)
|
|
| Weight of Revolution Telescopic 180 is 1100kgs with a 250 kg weight and the minimal tractor size recommended is 80 hp plus (can vary dependent on physical size, tractor balance and whether tractor has a front end loader or weights on). |
|
|
Standard features
|
Fully hydraulic
Fully hydraulic telescopic mast
overall vertical mast height 5.4 m
Vertical compacted height 3.3 m
Angled over mast height 2.7 m
In line angles 30 degree each way.
Across line angles 57 degrees in or out * (more given wide range of adjustment holes)
Drives .2 m poles
Post and strainer puller
180 degree radius subframe base
600 mm sideshift
250 kg weight
Contractors postcap.
Large floatation feet
Independently mounted valve bank
Replaceable UMHWPE anti wear pads
No greasing |
|
|
|
Options
|
300 kg weight
The Block - Weldess post cap.
Hydraulic legs ( one under mast, one under subframe - see frequently asked questions section).
Mast section for Auger/Rock Spike kits
Tool box
Post racks ( can carry up to 20 posts) |
|
|
|
|
  
 
  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
