Post Racks, Tool Trays & One-Man Fencing Workflow on the 180

One of the biggest advantages of the 180's subframe is what you can carry on it. Tony walks through his complete one-man workflow — post racks holding up to 30 fence posts or 9 strainers, trays for chains, spray cans, pliers, hammers and staples, plus ground pins and fiberglass level rods stored in the legs. He explains how he works backwards down the line, levelling each post off a single ground wire with a spirit level, blending any deflections by looking back at completed work.

Previous

Telescopic Mast Pulling Power – Up to 11 Tonne with Stroking

Next

Mast Angle & Stroke – Four Heel-Pin Positions for Tuning Outreach