Everything you need to set up, connect, and operate your new Revolution Post Driver — organised into short, focused videos by Tony White. Use this page as your go-to reference whenever you need a refresher on any part of the machine.
How the Revolution's independent angle ram provides up to 20 degrees of mast tilt in both directions — specifically in mid-mount position where the top link is not available for angle adjustment. Tony explains how this allows you to drive plumb posts even when the carrier machine is sitting on a significant slope, and notes that combining the angle ram with simultaneous side-shifting can further extend your effective working angle range.
How the telescopic mast works, its full capability, and the habits that keep it safe and undamaged. Tony covers the UHMWPE wear pad system and why the M6 stainless Allen key cap screws must be checked regularly. He also demonstrates how quickly the mast collapses, the correct practice of collapsing it before moving between posts, and the use of the safety pin and holster when traveling any significant distance on site.
